L68S10F - CRL L68S Series 118-1/8" Laminated Square Base Shoe
C.R.Laurence
 YOUR ACCOUNT               VIEW CART                SIGN INSIGN OFF
Search


View Larger Image

Catalog Number: L68S10F


  • For 11/16" (17.52 mm) Laminated Tempered Glass
    (8 x 1.52 x 8 mm)
  • Drilled and Counter Bored 11-13/16"
    (300 mm) Center-to-Center, or We Will
    Custom Drill to Your Specifications

  • Typically Used as the Base Channel for
    Glass Railing Systems or Windscreens

  • Works with LTL96X TAPER-LOC® Taper Sets
  • Custom Cutting and Mitering Service Available
  • CRL Recommends Consulting with the Glass
    Fabricator Prior to Wet Setting
    Laminated Tempered Glass
  • CRL Glass Railing Systems Meets
    NBC Load Requirements When Installed
    in Accordance to ICC-3842

    		•

    The CRL L68S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.


    CRL L68S Series 118-1/8" Laminated Square Base Shoe


    		 


    Other Products/Finishes:

    CATALOG NUMBER DESCRIPTION
    L68G10F CRL L68G Series 118-1/8" Standard Fascia Mount Square Base Shoe
    L68S10 CRL L68S Series 118-1/8" Laminated Square Base Shoe - No Holes
    L68S10D CRL L68S Series 118-1/8" Laminated Square Base Shoe
    L68S10D6 CRL L68S Series 118-1/8" Laminated Square Base Shoe
    L68S10F CRL L68S Series 118-1/8" Laminated Square Base Shoe

    Catalog Number:L68S10F
    Also Available in These Catalogs:
    CRL63R Architectural Railing Systems, PAGE 144R
    HR18 Architectural Railing Systems 2018, PAGE 167B
    CRL93A Architectural Railings, PAGE HR034
    Stock Length:118-1/8" (3 m)
    Counter Bore x Depth
    Holes Drilled C.T.C. :    		1-1/4" (31.7 mm) x 1/2" (12.7 mm)
    11-13/16" (300 mm)
    Ship Via:No UPS - Common Carrier Only
    Shipping Weight:86 lb (39.01kg)
    Minimum Order:1 Each

    GLASS SPECIFICATIONS:
    For use with 11/16" (17.52 mm) Laminated Tempered Glass (8 x 1.52 x 8 mm)
    Thickness Range: .666" (16.92 mm) to .713" (18.12 mm)

    CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. ColorsColours can vary depending on your computer's video card and on how your monitor's colorcolour is adjusted.

    LTL96X
    CRL TAPER-LOC® Tapers for 9/16" and 11/16" Laminated Tempered Glass