Used with the Ringed Anchor Fitting When the Cable System is Mounted to a Concrete Wall Surface

For 1/4" and 5/16" (6 to 8 mm) Panels
Easy-to-Install

Used with the Ringed Anchor Fitting When the Cable System is Mounted to a Concrete Wall Surface

The CRL Cable Loop Securing Clamp is designed to be used with the CB78 Ringed Anchor Fitting and the CB116 Cable Turnbuckle. The Cable Loop Securing Clamp is the integral link between the Cable and either the Turnbuckle or the Ringed Anchor Fitting. One each clamp is the minimum order.

CRL Cable Loop Securing Clamp for Cable Display System

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION
CB118	CRL Cable Loop Securing Clamp for Cable Display System

More Details:

Catalog Number:

CB118

Also Available in These Catalogs:

CRL53R Glass & Glazing Catalog, PAGE 307G

SC18 Standoff and Clamp Hardware, PAGE 60SC

Width:

17/32" (13.5 mm)

Height:

23/32" (18.2 mm)

Ship Via:

Can Ship UPS

Shipping Weight:

11 oz (318g)

Minimum Order:

1 Each

Additional Product Information:

No additional product information available at this time.

Important Notes:

WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36 kg). Each shelf can bear a total weight of 20 lbs. (9 kg), when used with CB74, CB76 and CB78 Ceiling Mount Fittings. If CB112 and CB114 Hanger Pipe Base Fittings are properly anchored and used as ceiling attachments, each column (4 cables) can bear a total weight of 40 lbs. (18 kg).

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Used with the Ringed Anchor Fitting When the Cable System is Mounted to a Concrete Wall Surface

For 1/4" and 5/16" (6 to 8 mm) Panels Easy-to-Install

Used with the Ringed Anchor Fitting When the Cable System is Mounted to a Concrete Wall Surface

The CRL Cable Loop Securing Clamp is designed to be used with the CB78 Ringed Anchor Fitting and the CB116 Cable Turnbuckle. The Cable Loop Securing Clamp is the integral link between the Cable and either the Turnbuckle or the Ringed Anchor Fitting. One each clamp is the minimum order.

For 1/4" and 5/16" (6 to 8 mm) Panels
Easy-to-Install