For 9/16" (13.52 mm) Laminated Tempered Glass
(6 x 1.52 x 6 mm)
Drilled and Counter Bored 12" (305 mm)
Center-to-Center, or We Will Custom Drill
to Your Specifications

Typically Used as the Base Channel
for Glass Railing Systems or Windscreens

Works with LTL96X TAPER-LOC® Taper Sets
Custom Cutting and Mitering
Service Available
CRL Recommends Consulting with the Glass
Fabricator Prior to Wet Setting
Laminated Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3842

The CRL L56S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.

CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D"

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION
L56S10	CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Undrilled for 9/16" Laminated Tempered Glass
L56S10D	CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D"
L56S10D6	CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Holes Pattern "D" for 9/16" Laminated Tempered Glass
L56S10F	CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Pattern "F" for 9/16" Laminated Tempered Glass
L56S10F6	CRL Mill Aluminum 10' L56S Series Standard Square Base Shoe Drilled with 9/16" Fascia Holes Pattern "F"

More Details:

Catalog Number:

L56S10D

Also Available in These Catalogs:

CRL63R Architectural Railing Systems, PAGE 142R

HR18 Architectural Railing Systems 2018, PAGE 163B

CRL53R Glass & Glazing Catalog, PAGE 568G

CRL63A Architectural Hardware Master, PAGE 594H

CRL93A Architectural Railings, PAGE HR032

LP11 Commercial Door Handles Catalog, PAGE L238

Stock Length:

120" (3.05 m)

Hole Size:

9/16" (14.3 mm)

Counter Bore x Depth
Holes Drilled C.T.C. :

7/8" (22.2 mm x 1/2" 12.7 mm)
12" (305 mm)

Ship Via:

No UPS - Common Carrier Only

Shipping Weight:

86 lb (39.01kg)

Minimum Order:

1 Each

Additional Product Information:

GLASS SPECIFICATIONS:
For use with 9/16" (13.52 mm) Laminated Tempered Glass (6 mm x 1.52 mm x 6 mm)
Thickness Range: 0.497" (12.62 mm) to 0.549" (13.94 mm)

Important Notes:

CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

For 9/16" (13.52 mm) Laminated Tempered Glass (6 x 1.52 x 6 mm) Drilled and Counter Bored 12" (305 mm) Center-to-Center, or We Will Custom Drill to Your Specifications

Typically Used as the Base Channel for Glass Railing Systems or Windscreens

Works with LTL96X TAPER-LOC® Taper Sets Custom Cutting and Mitering Service Available CRL Recommends Consulting with the Glass Fabricator Prior to Wet Setting Laminated Tempered Glass CRL Glass Railing Systems Meets NBC Load Requirements When Installed in Accordance to ICC-3842

For 9/16" (13.52 mm) Laminated Tempered Glass
(6 x 1.52 x 6 mm)
Drilled and Counter Bored 12" (305 mm)
Center-to-Center, or We Will Custom Drill
to Your Specifications

Typically Used as the Base Channel
for Glass Railing Systems or Windscreens

Works with LTL96X TAPER-LOC® Taper Sets
Custom Cutting and Mitering
Service Available
CRL Recommends Consulting with the Glass
Fabricator Prior to Wet Setting
Laminated Tempered Glass
CRL Glass Railing Systems Meets
NBC Load Requirements When Installed
in Accordance to ICC-3842