Works with Both 2-3/4" and 2-9/16" (70 and 65 mm) Pivot Setback Door Patch Fittings

For 3/8" or 1/2" (10 or 12 mm) Glass

Left and Right Handed
Use Monolithic Tempered Glass

The CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A or PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.

CRL Brushed Stainless Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert

Other Products/Finishes:

CATALOG NUMBER	DESCRIPTION	COLOR
PH41LA	CRL Satin Anodized Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41LBR	CRL Polished Brass Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
PH41LBS	CRL Brushed Stainless Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41LDU	CRL Dark Bronze Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
PH41LMBL	CRL Matte Black Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41LPS	CRL Polished Stainless Left Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert

More Details:

Catalog Number:

PH41LBS

Also Available in These Catalogs:

AH18 Architectural Hardware Catalog 2018, PAGE 213Z

CRL63A Architectural Hardware Master, PAGE 375H

CRL93A Architectural Hardware, PAGE CH125

Color:

Brushed Stainless

Ship Via:

Can Ship UPS

Shipping Weight:

2 lb (907g)

Minimum Order:

1 Each

Additional Product Information:

If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.

GLASS FABRICATION REQUIRED:
Five 7/8" (22 mm) Diameter
Holes and Two Corner Notches

COMES WITH:
Template and Instructions

Important Notes:

These fittings are not for use with Laminated Glass.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Works with Both 2-3/4" and 2-9/16" (70 and 65 mm) Pivot Setback Door Patch Fittings

For 3/8" or 1/2" (10 or 12 mm) Glass

Left and Right Handed Use Monolithic Tempered Glass

Left and Right Handed
Use Monolithic Tempered Glass